PV3300 TLV Series (AC:120V+120V 1-6KW)

Low Frequency Split Phase Solar Inverter 1~6KW | AC 110V/220V | MPPT 80A | DC 12V,24V,48V | PV 100V/245V | BAT-CAN

This split phase solar inverter PV3300 TLV series, capacity range from 1KW-6KW, DC 12V/24V/48V, it’s applicable to 110VAC/120VAC markets demands, which has AC output of single phase 110VAC/120V, split phase 220V/240V; In LCD display, you can set output voltage, frequency, charging voltage, charging current to design best use based on different loads applications; meanwhile, it has built-in MPPT solar charge controller 80A, you can take use of sunshine freely and save electricity bills.

Model Certification & Standards
PV33-3048/4024/4048/5048/6048 TLV CE-EMC+LVD(EN6100-6-3:2007, EN6100-6-1:2017+EN IEC62109-1:2010, EN IEC62109-2:2011)
Description

Description

■ Friendly user interface; MFD (multi-function display)

■ 3 Steps charging

■ Overload and short-circuit protection

■ Set charging voltage/charging current.

■ Battery low voltage shutdown point can be set to 10/10.5/11/11.5/12V

■ Set utility priority/ Battery priority

■ Set utility input wide/narrow range

■ Inverter voltage can be set to 100/110/120; frequency can be set to 50/60Hz

■ Set utility charging on/off switch

■ Built-in 80A MPPT charger

■ Acid or Lithium Select

■ WiFi port (optional)

■ With BMS lithium battery communication function (CAN port)

MODEL PV33-1012 TLV PV33-1512 TLV PV33-1524 TLV PV33-2012 TLV PV33-2024 TLV PV33-3024 TLV PV33-3048 TLV PV33-4024 TLV PV33-4048 TLV PV33-5048 TLV PV33-6048 TLV
INVERTER OUTPUT
Rated power 1KW 1.5KW 2KW 3KW 4KW 5KW 6KW
Power factor 1
Wave form Pure sine wave
Output voltage RMS 100V / 110V / 120VAC (200V / 220V / 240VAC) ±10%
Output frequency 50Hz or 60Hz (±0.3Hz)
Inverter efficiency (peak) >85%
Line mode efficiency >95%
Overload 100%<Load<110% (alarm 5min then stop outputand fault code 07) 110%<Load<125% (alarm 60s then stop output and fault code 07) Load > 125% (alarm 10s then stop output and fault code 07)
Surge rating 3000VA 4500VA 6000VA 9000VA 12000VA 15000VA 18000VA
Capable of starting electric motor 1P 1P 1.5P 1.5P 2P 3P
BATTERY
Battery voltage 12VDC/24VDC 24VDC/48VDC 48VDC
Minimum start voltage 10V/ 10.5V/ 11V/ 11.5V/ 12V±0.5V; 12VDC×2 for 24V; ×4 for 48VAC
Low battery cut off low voltage fault code 04

(10V/ 10.5V/ 11V/ 11.5V/ 12V) for 12V model (21V/21V /22V/ 23V/ 24V) for 24V model (40V/ 42V/ 44V/ 46V/ 48V) for 48V model

Low battery alarm Add 0.5/battery: (low battery alarm one second one time) (10V/ 10.5V/ 11V/ 11.5V/ 12V) +0.5VDC for 12V model

(21V/ 21V/ 22V/ 23V/ 24V) +1VDC for 24V model (40V/ 42V/ 44V/ 46V/ 48V) +2VDC for 48V model

High voltage alarm Add +1V/battery: (high voltage one second one time / after 30s fault 03) (12-14.5V) +1VDC for 12V model

(24-29V) +2VDC for 24V model (48-58V) +4VDC for 48V model

Save mode Load ≤40W(110V) / 80W(220V)
AC INPUT MODE
Input waveform Pure sine wave
Nominal input voltage 200Vac / 220Vac / 240Vac
Max input voltage 270Vac MAX
Input frequency 50Hz / 60Hz (auto sensing)
Efficiency (AC mode) >95% (load, full battery)
Transfer time AC to DC 15ms(typical)
SOLAR CHARGER
Maximum PV Array Power 1250W 1250W 2500W 1250W 2500W 2500W 5000W 2500W 5000W 5000W 5000W
Maximum PV Charge Current 80A±4A
DC Voltage 12V / 24V 24V / 48V 24V / 48V
MPPT Range @ Operating Voltage 15~95VDC @ 12V / 30~230VDC @ 24V 30~230VDC @ 24V / 60~230VDC @48V 60~230VDC @48V
Maximum Solar Input Voltage 100±2Vdc / 245±2Vdc 245±2Vdc 245±2Vdc
Maximum Efficiency >98%
Standby Power Consumption <2W
CHARGE MODE
Max charge current (±5A) 12V 30A 45A 60A / / / /
24V 20A 25A 30A 40A 60A / /
48V / / / 20A 30A 35A 40A
Min charge current 10A. Change by every 5A
DIMENSIONS
Machine Dimension (W*H*D) 443*359.2*188mm 544*362*188mm
Package Dimension (W*H*D) 598*457*308mm 698*457*308mm
Warranty 1year